[DLL Laminator] Using the laminator

To use the Saturn 2 125 Laminator, flip the power switch on the back of machine and select the appropriate pouch thickness (3Mil, 4Mil, 5Mil). Use “snowflake” setting for cold-seal pouches. Wait 5-6 minutes for machine to warm up if you don’t select the cold setting. Once the machine is ready, the timer light will stop flashing and the machine will beep.

Place the document in the lamination pouch and center it. Feed the pouch into the machine sealed edge first. Remove the document as soon as it is done in order to prevent jams. Once finished, give the laminator a couple of minutes to cool down before putting it away again.

By | 2017-10-24T14:53:03+00:00 July 25th, 2017|Comments Off on [DLL Laminator] Using the laminator

About the Author:

Mon-Fri, 9-5